Old – Plan Room

Project Designers

G: Al Fitterer, AIA
M: Randy Axvig P.E./
Steve Butterfield
E: Jeremy Butman P.E.

Addendums

February 26, 2018
Addendum G2
Addendum E2

February 22, 2018
Addendum G1
Addendum M1
Addendum E1

Plan Holders List

Bid Tabulation

Project Details

Central Office Remodel
Job Service North Dakota
Bismarck, North Dakota
Bid Date:  February 28, 2018

The Project consists of the remodeling of portions of existing office area on the third and fourth floors of the Central Office Building and the installation of new flooring on the 1st, 3rd and 4th Floors

The building is a structural steel building frame with concrete slab-on-grade at the ground floor, concrete slab over structural steel deck and steel beam framing for the second and third floors and roof system.

Project bid documents may be downloaded by filling out the following information.  Your firm will be added to the planholder list and the contact information will be used to notify your company contact person of any updates to the bid documents prior to bid.

Project Designers

G: Burton Youngs AIA/
Allen Domagala
S: Sam Wilke
M: Caleb Bulow P.E./
Brent Detlaff
E: Jason Hunze P.E./
Jeremy Fairaizl

Addendums

February 9, 2018
Addendum #01

February 15, 2018
Addendum #02

Plan Holders List

Bid Tabulation

Project Details

New Town Public Safety Facility
New Town Volunteer Fire Department
New Town, North Dakota
Bid Date:  February 20, 2018

The Project consists of a new (11,846 S.F.), steel frame building with heated floor in the apparatus bay portion. Remaining building is forced air heating/cooling. The building will have a 8’-0” high wall of masonry around the entire apparatus bay exterior and 2’-8” high wall of masonry at the administration portion.  Remaining exterior finishes are metal siding and standing seam roof system. ¾ of the building will be apparatus bay for the fire department vehicles and ¼ of the building will be a meeting room with kitchen, lockers, toilets, radio room, staging room, and offices.  There is an alternate for an exercise space with four bedrooms and an alternate for furniture.

The Scope of Work includes, but is not limited to the following: Concrete Reinforcing, Cast-In-Place Concrete, Channel Drains, Concrete Densifier and Sealer, Unit Masonry, Structural Steel, Steel Joists, Steel Deck, Metal Fabrications, Bollard Covers, Rough Carpentry, Finish Carpentry, Sheathing, Plastic Paneling, Dampproofing, Insulation, Manufactured Metal Panels, Flashing and Sheet Metal, Fire Stopping, Joint Sealers, Sealants and Caulking, Steel Doors and Frames, Wood Doors, Sectional Overhead Doors, Aluminum Windows, Tubular Skylights, Finish Hardware, Glass and Glazing, Gypsum Drywall and Light Steel Framing, Tile, Resilient Flooring and Wall Base, Acoustical Ceilings, Painting, Signs, Toilet Partitions–Polymer, Wall and Corner Guards, Toilet and Bath Accessories, Fire Extinguishers, Lockers-Metal, Laminate Clad Casework, Fire Protection, Plumbing, HVAC, Electrical, Communications, Electronic Safety & Security, Site Clearing, Earth Moving, Trenching-Backfilling and Compaction, Aggregate Base Coarse and Gravel Surfacing, Rip rap, Sanitary Sewer Utilities, Storm Sewer.

Opinion of approximate estimated Base Bid cost:  $3,300,00.00+

Opinion of approximate estimated Alternate G-1, M-1, & E-1 cost:  $360,000.00+

Project bid documents may be downloaded by filling out the following information.  Your firm will be added to the planholder list and the contact information will be used to notify your company contact person of any updates to the bid documents prior to bid.

Project Designers

G: Al Fitterer, AIA
M: Randy Axvig P.E./
Steve Butterfield
E: Jeremy Butman P.E./
Brad Gulbranson

Addendums

January 12, 2018
Addendum G1
Addendum M1
Addendum E1

January 17, 2018
Addendum G2
Addendum M2
Addendum E2

Plan Holders List

Project Details

First Lutheran Church
Boiler and HVAC Upgrade

Mandan, North Dakota
Bid Date:  January 18, 2018

The project consists of the replacement of the boiler and HVAC systems, along with the associated general and electrical building modifications.

The building is a two story structure with the main floor structure consisting of a concrete floor slab over metal decking over steel joists and steel beam framing.  The worship space roof structure consists of a laminated wood beam and deck A-frame. The office wing roof structure is a flat roof laminated wood beam and deck structure with exterior walls consisting of load bearing masonry wall construction.  Interior walls are a combination of CMU and wood stud non-loading partitions. The office roof has been modified with wood trusses to provide a 2/12 roof pitch.

Project bid documents may be downloaded by filling out the following information.  Your firm will be added to the planholder list and the contact information will be used to notify your company contact person of any updates to the bid documents prior to bid.

Project Downloads